Center Certification & Testing International
basic introduction
In order to promote energy conservation and environmental protection, with the approval of the State Council, from February 1, 2015, the consumption tax on coatings with a volatile organic compound (VOC) content greater than 420g/L under construction will be levied.
Paint refers to the general term for a class of liquid or solid materials that can be applied to the surface of an object to form a solid coating with protection, decoration or special properties.
The Chinese coatings industry defines VOC as "any organic compound with an initial boiling point less than or equal to 250 °C at a standard pressure of 101.3 kPa.
standard test
GB 18581-2009 "Interior Decoration Materials, Limits of Harmful Substances in Solvent-Based Wood Coatings"
GB 18582-2008 "Limit of harmful substances in interior wall coating materials for interior decoration"
GB 24613-2009 "Limits for Harmful Substances in Paints for Toys"
GB 24410-2009 "Limit of harmful substances in water-based wood coatings for interior decoration materials"
GB 24408-2009 "Limit of harmful substances in exterior wall coatings for construction"
GB/T 1725-2007 "Determination of Non-Volatile Content in Paints, Varnishes and Plastics"
GB/T 23985-2009 "Determination of Volatile Organic Compound (VOC) Content of Paints and Varnishes" Difference Method"
GB/T 23986-2009 "Determination of Volatile Organic Compounds in Paints and Varnishes Part 2 Gas Chromatography"
HJ 2537-2014 "Technical Requirements for Environmental Labeling Products Waterborne Coatings"
Test product range
The coating consists of primary film-forming substances, secondary film-forming substances, etc.
According to the main film-forming substance coatings: oils, natural resins, phenolic resins, asphalts, alkyd resins, amino resins, nitros, filter vinyl resins, vinyl resins, acrylic resins, Polyester resins (aqueous coatings), epoxy resins, polyurethane resins, elemental organics, rubbers, celluloses, other film-forming materials, etc. (Including solvent-based and water-based paint.)
Separate resins, curing agents, thinners and auxiliary film-forming substances in coatings do not need to be tested.
In order to promote energy conservation and environmental protection, with the approval of the State Council, from February 1, 2015, the consumption tax on coatings with a volatile organic compound (VOC) content greater than 420g/L under construction will be levied.
Our advantage
1. With a professional qualification and experienced expert technical team, we can provide you with professional consultation and services.
2. Have advanced laboratory equipment to ensure the accuracy and reliability of test data.
3. As a third-party testing and certification organization trusted by customers worldwide, we are your certificate of quality.
RCM certification is a certification system implemented by Australia and New Zealand to ensure that electrical products comply with local safety, electromagnetic compatibility, and other standards.
FCC ID certification is a mandatory requirement under US law. The Federal Communications Commission (FCC) in the United States strictly regulates issues such as electromagnetic compatibility and radio interference in electronic products. As an electronic communication device, routers are only allowed to be sold and used in the US market if they have obtained FCC ID certification, otherwise they will face legal penalties and market bans.
CE-RED certification is a mandatory requirement for market access in the European Union. According to relevant EU regulations, all wireless devices entering the market must be certified by RED (Wireless Device Directive) to ensure compliance with EU standards.
In order to promote energy conservation and environmental protection, with the approval of the State Council, from February 1, 2015, the consumption tax on coatings with a volatile organic compound (VOC) content greater than 420g/L under construction will be levied.
Get a quote
Tik Tok
